ABB Serie M22001 Handbuch Seite 16

ABB-Welcome
Settings
Set addresses for the preferred outdoor stations and the address for the indoor station
on the jumper (see chapter "
Mounted on the wall
1. Fix the bottom of the device to the wall.
2. Latch the upper part of the device onto its bottom part: place the upper side of the
device on the lock-in lugs and then press the bottom side onto the bottom part of
the device until it is caught by the clamp.
Mounted with flush-mounted box
|
Adjusting the device
Mounting / Installation
").
— 16 —