Herunterladen Inhalt Inhalt Diese Seite drucken

Quick Start Guide; Pre Installation; Checkout; Site Selection - Bresser 4Cast XL WIFI Weather Center Bedienungsanleitung

Mit 7in1 funksensor
Vorschau ausblenden Andere Handbücher für 4Cast XL WIFI Weather Center:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1.1

QUICK START GUIDE

The following Quick Start Guide provides the necessary steps to install and operate the
weather station, and upload to the Internet, along with references to the pertinent sections.
Step
1
Power up the 7-in-1 sensor array
2
Power up the display console and pair with sensor array
Manually set date and time (This part is unnecessary if the weather
3
station is connected to PWL later)
4
Reset the rain to zero
5
Create account and register weather station at PWL
6
Connect weather station to WI-FI
2.

PRE INSTALLATION

2.1

CHECKOUT

Before permanently install your weather station, we recommend the user to operate the
weather station at a location which is easy to access to. This will allow you to get familiar with
the weather station functions and calibration procedures, to ensure proper operation before
installing it permanently.
2.2

SITE SELECTION

Before installing the sensor array, please consider the followings;
1. Rain gauge must be clean every few months
2. Avoid radiant heat reflected from any adjacent buildings and structures. Ideally, the sensor
array should be installed at 1.5m (5') from any building, structure, ground or roof top.
3. Choose an area of open space in direct sunlight without any obstruction of rain, wind, and
sunlight.
4. Transmission range between sensor array and display console could reach a distance of
150m (or 450 feet) at line of sight, providing there are no interfering obstacles in between
or nearby such as trees, towers, or high voltage line. Check the reception signal quality to
ensure good reception.
5. Household appliance such as fridge, lighting, dimmers may pose Electro-magnetic
interference (EMI), while Radio Frequency Interference (RFI) from devices operating in the
same frequency range may cause signal intermittent. Choose a location at least 1-2 meter
(3-5 feet) away from these interference sources to ensure best reception.
Description
7
Section
3.1.3
3.4
4.4.1
4.3.10.2
5
6.1, 6.2, 6.3

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

7003230790323078035104cast xl

Inhaltsverzeichnis