Herunterladen Inhalt Inhalt Diese Seite drucken

Bosch TCA 53 Serie Gebrauchsanleitung Seite 19

Vorschau ausblenden Andere Handbücher für TCA 53 Serie:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
en
● Place a suitable container (approx. "0,5 l")
under the nozzle 8.
● Set the dial 6 to
● When water stops coming out of the
nozzle 8, set the dial back to "O".
● Fill the water tank and the water pipes
(see "Switching on the appliance / Filling
the system").
Adjusting the grinding unit
Sliding switch 15 adjusts the degree of
grinding, from coarse to fine.
¡
¡
Warning
Adjust the grinding unit only while it is
running! Otherwise the appliance may be
damaged.
● Press dispensing button 4
● While the grinding unit is running, move
the sliding switch 15 to the desired posi­
tion: the smaller the dots, the finer the
grind.
i
¡
The new setting will not become apparent
until the second or third cup is brewed.
Tip: For dark roast coffee beans, choose a
coarser grind; for light roast beans, select a
finer grind.
Automatic switch-off auto off
The pre­set automatic switch­off time of
approx. 10 minutes can be changed.
● To do this, press and hold the dispensing
E
button 3
and the button 5
same time for at least 5 seconds. The
LEDs that light up, 7a, b, c and d (
S
J
,
), represent the switch­off time set.
By pressing the button 5
off time can be selected:
H
LED 7a (
) lights up
= A ppliance switches off after approx.
10 minutes.
LED 7a and 7b (
= A ppliance switches off after approx.
30 minutes.
LED 7a, 7b and 7c (
= A ppliance switches off after approx.
1 hour.
g
h
/
.
F
.
h
at the
h
, the switch­
H
I
,
) light up
H
I
S
,
,
) light up
LED 7a, 7b, 7c and 7d (
light up
= A ppliance switches off after approx.
4 hours.
Pressing button 2
Setting the temperature
This fully automatic coffee machine allows
the user to change the temperature of the
coffee.
● To do this, press and hold the dispensing
buttons 3
at least 5 seconds. The LEDs that light
up, 7a, b and c (
temperature set. By pressing the button 5
h
, the temperature can now be selected:
LED 7a (
= Low temperature.
LED 7a and 7b (
= Medium temperature.
LED 7a, 7b and 7c (
= High temperature.
Pressing button 2
Float
The float 19 in the water tray 18 shows
when the tray needs emptying.
● If the float 19 is clearly visible, empty the
water tray 18.
H
I
,
,
H
,
â
saves the s election.
E
F
and 4
at the same time for
H
I
S
,
,
), represent the
H
) lights up
H
I
,
) light up
H
I
,
,
â
saves the selection.
15
I
S
J
,
,
)
S
) light up
TCA53 03/2012

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis