Dell Latitude 9440 2-in-1 Servicehandbuch Seite 42

9. Remove the battery.
About this task
CAUTION: The heatsink must be first removed before removing the system board, as there are two (M1.6x2)
screws underneath the heatsink that secure the system board to the chassis.
1. Right speaker cable connector
2. WWAN card connector
3. Touchpad cable connector
4. Battery cable connector
5. USH I/O board cable connector
6. Left fan cable connector
7. M.2 2230 solid-state drive connector
8. Left speaker cable connector
9. Display cable connector
10. Camera cable connector
The following images indicate the location of the system board assembly and provide a visual representation of the removal
procedure.
42 Entfernen und Einbauen von Komponenten