Technische Angaben; Zertifikate Und Zulassungen - Siemens SIMATIC IPC547E Betriebsanleitung

Technische Angaben

8.1

Zertifikate und Zulassungen

ISO 9001-Zertifikat
Das Qualitätssicherungssystem unseres gesamten Produktentstehungsprozesses
(Entwicklung, Produktion und Vertrieb) erfüllt die Anforderungen der ISO 9001:2008.
Dies wurde uns von der DQS (Deutsche Gesellschaft zur Zertifizierung von
Qualitätsmanagementsystemen mbH) bestätigt.
Zertifikat Nr.: 001323 QM08
Software-Lizenzvereinbarungen
Wenn das Gerät mit installierter Software geliefert wird, dann beachten Sie die zugehörigen
Lizenzvereinbarungen.
UL-Zulassung
Für das Gerät liegen folgende Zulassungen vor:
● Underwriters Laboratories nach Standard-UL 60950-1, File no. E11 5352
● Canadian National Standard CAN/CSA-C22.2 No. 60950-1-07 (I.T.E)
FCC und Kanada
USA
Federal
Communications
Commission
Radio Frequency
Interference
Statement
Shielded Cables
Modifications
Conditions of
Operations
SIMATIC IPC547E
Betriebsanleitung, 03/2015, A5E32317119-AC
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
Shielded cables must be used with this equipment to maintain compliance with
FCC regulations.
Changes or modifications not expressly approved by the manufacturer could void
the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
8
113