HIKMICRO CONDOR-Serie Bedienungsanleitung Seite 5

Install Battery
4.
Steps
1. Rotate the battery compartment cover counterclockwise (1) to loosen it, and pull the battery cover out (2).
2. Insert a battery into the battery compartment as the positive and negative marks indicate.
3. Insert the battery compartment cover (3) and rotate it clockwise (4) until it is tight and locked.
Note:
Remove the battery if the device is not used for a long time.

The external rechargeable battery type is 18650, and the battery size should be 19 mm × 70 mm. The rated

voltage is 3.6 VDC, and the battery capacity is 3200 mAh.
Charge the battery for more than 4 hours before first use.

To ensure better conductivity, if the battery compartment cover gets dirty, use a clean cloth to wipe the thread.

Charge Device
5.
Steps
1. Lift the type-C interface cover.
2. Connect the device and power adapter with a type-
C cable to charge the device.
3