Herunterladen Diese Seite drucken

DJI AGRAS T25 Kurzanleitung Seite 14

Vorschau ausblenden Andere Handbücher für AGRAS T25:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 83
Tap
to use the field
and set task parameter.
Only take off in open areas and set an appropriate Connection Routing and RTH Altitude according to the
operating environment.
An operation can be paused by moving the control stick slightly. The aircraft will hover and record the
breakpoint. After which, the aircraft can be controlled manually. Select the operation again to continue. The
aircraft will return to the breakpoint automatically and resume the operation. Pay attention to aircraft safety
when returning to a breakpoint.
In Route Operation mode, the aircraft is able to bypass obstacles, which is disabled by default and can be
enabled in the app. If the function is enabled and the aircraft detects an obstacle, the aircraft will slow down
and bypass the obstacle and return to the original flight path.
Users can set the action the aircraft will perform after the operation is completed in the app.
Maintenance
Clean all parts of the aircraft and remote controller at the end of each day of spraying after the
aircraft returns to a normal temperature. DO NOT clean the aircraft immediately after operations are
completed.
A. Fill the spray tank with clean or soapy water and spray the water through the sprinklers until the
tank is empty. Repeat this step three times.
B. Remove the spray tank strainer and sprinklers to clean them and clear any blockage. Afterwards,
immerse them in clean water for 12 hours.
C. Make sure that the aircraft structure is completely connected so that it can be washed directly with
water. It is recommended to use a spray washer filled with water to clean the aircraft body and wipe
with a soft brush or wet cloth before removing water residue with a dry cloth.
D. If there is dust or pesticide liquid on the motors, propellers, or heat sinks, wipe them with a wet
cloth before cleaning the remaining water residue with a dry cloth.
E. Wipe the surface and screen of the remote controller with a clean wet cloth that has been wrung
out with water.
Refer to the disclaimer and safety guidelines for more information on product maintenance.
Download the user manual for more information:
https://ag.dji.com/t25/downloads
Tap
, check the aircraft
status and task settings, and
move the slider to take off.
13

Werbung

loading