Connection; Connecting The Grounding Cable; Connecting The Light To The Power Supply - Waldmann Tevisio Rllq 48 R Gebrauchsanweisung

ENG
5.

Connection

NOTICE
Material damage caused by wrong
mains voltage.
Damage or destruction of the light.
X Check whether the mains voltage
matches the nominal voltage and
the frequency specified on the rat-
ing plate and make sure that they
match.
NOTICE
Material damage caused by wrong
handling.
Omission of the ESD protection and
damage to electronic components.
X Luminaires suitable for EPA must
remain plugged in in electrostati-
cally protected areas (EPA).
22
5.1 Connecting the grounding
cable
NOTE: This chapter applies only to lumi-
naires suitable for EPA.
Fig. 6: Pushbutton for grounding cable.
X Connect one end of the provided
grounding cable to the pushbutton A
of the luminaire, see Fig. 6.
X Connect the other end of the ground-
ing cable to a grounding contact point.
5.2 Connecting the light to the
power supply
X Plug the plug-in power supply unit into
a socket.
Connection
A