Mounting; Mounting The Fastening Elements; Mounting The Light To The Fastening Element; Mounting The Magnifier Cover - Waldmann Tevisio Rllq 48 R Gebrauchsanweisung

ENG
3.

Mounting

CAUTION
Risk of injury caused by a falling or
tilting light.
Personal injury and material damage.
X Mount fastening elements correctly.
3.1 Mounting the fastening
elements
NOTICE
Material damage caused by missing
ESD protection.
Electrostatic discharge and damage to
electronic components.
X In electrostatically protected areas
(EPA), only luminaires suitable for
EPA must be used.
X Use only fastening elements suit-
able for EPA.
Fig. 1: Fastening element.
X Screw the fastening element to the
mounting surface using four suitable
screws.
20
3.2 Mounting the light to the
fastening element
Fig. 2: Mounting the light to the fastening
element.
X Insert the stud A on the light support
into the opening of the fastening ele-
ment, see Fig. 2.
X Tighten the screw B to fix the support.
3.3

Mounting the magnifier cover

CAUTION
Fire risk when the magnifier is not
covered and exposed to sunlight.
Personal injury and material damage.
X When the magnifier is not used,
cover it with the magnifier cover.
Fig. 3: Mounting the magnifier cover.
X Compress the upper part of the magni-
fier cover, see Fig. 3.
X Place the magnifier cover on the mag-
nifier from above and release the cover.
The magnifier cover is clamped to the
light head.
Mounting
A
B