IFM Electronic CANmonitor EC2033 Bedienungsanleitung Seite 18

4.3. Evaluation characteristics
The maximum number of messages the CANmonitor can detect and evaluate is shown in the graph
below. The data refer to messages in the standard format with a data byte.
The detection rate of the CANmonitor in per cent depending on the baud rate
bus load 50 % (constant interval between messages)
bus load 10 % (constant interval between messages)
Seite / Page 18
100
90
80
70
60
50
40
30
20
10
0
Baudrate / baud rate [kBit/s]