Vestfrost FZ 214 W Bedienungsanleitung Seite 11

4. Dismount the bottom cover (the build-
in snap function in each side can be
unsnapped with the flat-headed screw-
driver).
5. Place the bottom cover with glass front
down, on an additional support, so the
wires are not stretched.
6. The door LED wires have to be dis-
mounted from the connector on the
bottom cover (pure black & black / white
stripe wires). Push the top release down
to free the wire ends. (Note: the pure
black wire is + and corresponds to the
red wire on opposite side. The black /
white stripe wire is 0 (neutral) and corre-
sponds to the black wire on the opposite
side – this is important when the wires
are to be mounted later)
7. To reverse the bottom glass, the brackets
need to be removed. Loosen the screw
and the bracket incl. screw and bolt
slides of the plastic profile.
NOTE: Now the glass is loose.
11
GB