Sony HMI-3000MT Bedienungsanleitung Seite 27

Specifications
General
Power requirement
24 V DC (supplied from AC-80MD
AC adapter)
Input current 1.5 A
Operating conditions
Temperature: 5 °C to 35 °C
(41 °F to 95 °F)
Relative humidity: 25% to 80%
(no condensation)
Atmospheric pressure: 700 hPa to
1060 hPa
Storage/transportation conditions
Temperature: –20 °C to +60 °C
(–4 °F to +140 °F)
Relative humidity: 20% to 80%
(no condensation)
Atmospheric pressure: 700 hPa to
1060 hPa
Dimensions (width / height / depth, excluding maximum
protrusions)
Approx. 306 mm × 56.5 mm × 358 mm
⁄
(12 in. × 2
1
8
Mass Approx. 3.3 kg (7 lb. 4.4 oz.) (excluding
power cord)
Input/output connectors
DVI input connectors
DVI-D connectors (2)
Single link TMDS
SDI input connectors
BNC type (2)
SMPTE 292M standard compliance
DC IN connector
3-pin DIN, 24 V
AC adapter (AC-80MD)
REMOTE connectors
Stereo mini jack (2)
DVI output connectors
DVI-D connectors (2)
Single link TMDS
SDI output connectors
BNC type (2)
SMPTE 292M standard compliance
HMM output connector
Dedicated 20-pin (2)
(connects to HMO-CA50M)
Input/output supported signals
Video input (2D)
720/50p, 720/60p, 1080/50i, 1080/60i,
1080/50p, 1080/60p
⁄ ⁄
in. × 14 in.)
1 1
4 8
Video input (3D)
Side-by-side, Dual stream
720/50p, 720/60p, 1080/50i, 1080/60i
Output signal Input signal is output as-is. Note that the
following signals are not supported.
DVI signals:
• Signals with HDCP (also not output to
the HMM-3000MT)
• Signals with HDMI functions
• Signals with resolution higher than
Full HD
SDI signals:
• Audio signals
• 3G-SDI signals or higher
Supplied accessories
Before Using this Unit (1)
CD-ROM (Instructions for Use) (1)
AC-80MD AC adapter (1)
AC-80MD Instructions for Use (1)
Service Contact List (1)
Optional accessories
HMM-3000MT head mounted monitor
HMO-CA50M head mounted display cable
FS-24 foot switch
Note: The FS-24 has only an IPX3 splash proof rating,
and should not be used in locations where it may be
exposed to fluids (e.g., operating rooms). For
safety, products with IPX6 or higher rating should
be used in such instances.
Remote control using REMOTE connector
Sending the remote control pulse signal, illustrated below,
via the REMOTE connector performs the same
operations as pressing the INPUT button.
Timing pulse for REMOTE connector
REMOTE pin assignment
Control N.C. GND
27
Specifications