Clearaudio VTA-Lifter Bedienungsanleitung Seite 6

User manual / Bedienungsanleitung
Now turn the level completely to the "+" side, to tighten the tonearm with the two (2) delivered maggots
screws (see pic. 4 + 5) on the side of the
+
-
Pic. 4: Tighten the tonearm
2.3 Height adjustment
To adjust the height of the tonearm turn the level either to the right side
(marked with a "+") to heighten the tonearm or to the left side (marked
wit a "-") to reduce the height of the tonearm. With the new
(2) you can adjust the height even while you are playing music.
2.4. Installation on a Champion base
For the installation please remove the tonearm and the base from your turntable.
VTA-Lifter
Fit the (2) from above through the hole of the base.
Pic. 7: Mounting the VTA-Lifter
VTA-Lifter
Tighten the (2) with the delivered cylinder head bolts and the hex key wrench (3 x 8) bottom side
of the Champion – base (see pic. 8).
Now you can mount the Champion base on the turntable chassis.
To finish the installation please proceed further as described before.
6
VTA-Lifter
in a Champion base
(2).
Pic. 5: Tighten the tonearm
to increase
VTA-Lifter
to reduce
Pic. 6: Height adjustment
Pic. 8: Tighten the
© clearaudio electronic GmbH, 2018/11
VTA-Lifter