Setting Options In "Playback" Mode - Conrad 67 15 89 Bedienungsanleitung

h) Setting options in "Playback" mode
First, use the "MODE" button to select "Playback" mode (in the bottom left-hand corner of the
display, the picture number and the total number of pictures is shown).

If no picture has been saved yet in the internal memory or on the inserted SD
memory card, the TFT screen shows an error message.
Press the "M" button (14) to open the main menu.
Use buttons "" (7) and "" (16) to select the setting options.
Use the "" button (15) to open a sub-menu. Use buttons "" (7) and "" (16) to select a
setting option.
Press the "M" button (14) to confirm your selection and go back to the main menu.
The following functions are available:
• "Erase" function
"One": The currently shown picture is deleted.
"All": All pictures saved in the memory (or on the inserted SD memory card) are deleted.
"Format": If necessary, the memory (or the inserted SD memory card) can be formatted. All
data on the memory card is lost.
• "DPOF" function
This setting is made for pictures saved on an SD memory card. "DPOF" stands for "Digital
Print Order Format". For each picture, you can specify the number of copies a photo shop
should make for you (if you take the memory card to a photo shop that can read the
information).
• "Rotation" function
The picture on the TFT display can be rotated in 90°-steps (0°, 90°, 180°, 270°).
• "Date Time" function
Use the "Date Time" function to set the date and the time used by the "Date Time Stamp"
function (see chapter 11. g).
Use buttons "" (6) or "" (15) to switch between day, month, and year. Use buttons ""
(7) and "" (16) to change the value. Press the "M" button to save your changes and move
on to the time settings.
Use buttons "" (6) or "" (15) to switch between hours and minutes. Use buttons "" (7)
and "" (16) to change the value. Press the "M" button to save your changes and go back
to the main menu.
38