E) Switching Between "Preview" And "Playback" Mode; Using The On-Screen Menu; Setting Options In "Preview" Mode - Conrad 67 15 89 Bedienungsanleitung

e) Switching between "Preview" and "Playback" mode

When die TFT monitor is tilted up und the camera is switched on, the camera is in "Preview"
mode. The TFT monitor shows the live picture so that you can best select the image section.
Press the "MODE" button to switch to "Playback" mode. In "Playback" mode you can look at
the saved pictures on the TFT monitor. In the bottom left-hand corner of the display, the picture
number and the total number of pictures is shown.
Press the "MODE" button again to switch back to "Preview" mode.

The menu options are different for each mode. See chapters 11. g) and 11. h).
f) Using the on-screen menu
The OSD (= on-screen display, on-screen menu, setting options on the TFT monitor) is
activated and exited by pressing the "M" button.
Use the four arrow keys "" (6), "" (7), "" (15) and "" (16) to select and adjust the
settings.
g) Setting options in "Preview" mode
First, use the "MODE" button to select "Preview" mode (the resolution is displayed in the
bottom left-hand corner).
Press the "M" button (14) to open the main menu.
Use buttons "" (7) and "" (16) to select the setting options.
Use the "" button (15) to open a sub-menu. Use buttons "" (7) and "" (16) to select a
setting option.
Press the "M" button (14) to confirm your selection and go back to the main menu.
The following functions are available:
• "Capture" function
"Single":
"Self-timer":
"Video":
36
Picture mode for single pictures
Self-timer
Video mode (resolution 320 x 240)