Folding Instructions - grabner INDIO Handbuch

DISMaNTlING
► Choose clean ground for dismantling
and packing.
► Remove all loose parts from the boat
(seats, spray cover, personal items, ...)
► Deflate the boat.
► Remove seat-boards.
► Clean and dry your boat and the accesso-
ries to avoid damage by grit!
► Check your boat for possible damage,
and repair such as soon as possible, rea-
dy for next use!

fOlDING INSTrUCTIONS

► Roll up the boat from bow to stern (di-
rection towards valves) so as to allow
discharge of air.
► Unroll the boat and fold it in half
lengthwise.
► Fold the floor on the side tubes, so the-
re is a straight line between the bow and
stern reinforcement.
8
► Start firmly rolling the boat from bow to
rear.
► Fold the stern over to the inside of the
roll and continue until finish.
CaUTION: Make sure there is no air left
in the boat!
► Lace the rolled up boat by means of a
line or strap.
CaUTION: The boat must not be stored
in this state for longer periods! (refer
„care and storage")
► You may now pack your boat and stan-
dard accessories into your pack-bag or
rucksack (special accessory).
CaUTION: Check for completion of all
parts!
► If you still find residue of air inside air
chambers of the boat, you may not be
able to successfully stow your boat into
your bag or rucksack.
(In the event of that unroll the boat and repeat
the process of rolling up once more).