Werbung
According to 2006/42/EC, Annex II, No. 1 B
Authorized person /
the manufacturer
[company or natural person]
Description and
identification of the
machinery:
The following
essential health and
safety requirements
according to Annex I
of this directive are
applicable and have
been fulfilled:
The following
harmonized
standards (or parts
therof) were
applied:
The relevant technical documentation according to Annex VII B has
been established and it shall be delivered electronically to the national
authorities in charge upon request.
This partly completed machinery must not be put into service until the
final machinery into which it is to be incorporated, has been declared in
conformity with the provisions of the machinery directive.
Page 14 from 14
Declaration of Incorporation
Translation
MAEDLER GmbH
Traenkestr. 6 - 8
D - 70597 Stuttgart
Ballscrews
Technical specifications according to our
order confirmation to raise and lower loads.
1.1.2
1.61
EN ISO 12100-1 Safety of machinery - Basic
concepts, general principles for design
EN 1570:1998 Safety requirements for lifting
tables
EN 1495:1997 Lifting platforms - Mast climbing
work platforms
EN 280:2001 Mobile elevating work platforms
1.3.2
1.3.7
1.74
4.4.2
1.38
Werbung
