Makita M9000 Betriebsanleitung Seite 11

COMBINATION OF APPLICATIONS AND ACCESSORIES
Optional accessory
CAUTION:
Using the tool with incorrect guards can cause risks as follows.
• When using a cut-off wheel guard for facial grinding, the wheel guard may interfere with the work-
piece causing poor control.
• When using a grinding wheel guard for cutting-off operations with bonded abrasive wheels and dia-
mond wheels, there is an increased risk of exposure to rotating wheels, emitted sparks and particles,
as well as exposure to wheel fragments in the event of wheel burst.
• Use of dust collecting wheel guards for cutting-off and facial operations in concrete or masonry
reduces a risk of exposure to dust.
• When using dual purpose (combined grinding and cutting-off abrasive) flange mounted wheels, only
use a cut-off wheel guard.
2
3
5
6
-
1
2
3
4
5
6
7
8
9
10
11
12
13
14
-
NOTE: *1 Use Inner flange 78 and Outer flange 78 together. (Australia and New Zealand only)
NOTE: *2 Use the Side grip for dust collecting wheel guard and the Dust collecting wheel guard for cutting-off together.
NOTE: *3 For more details, refer to each instruction manual of the guard.
4
8
Application
-
-
-
-
Grinding
-
-
Cutting-off
Grinding / Cutting-off
-
-
-
-
Cutting-off
-
7
7
10
3
4
8
9
11
6
6
180 mm model
Abrasive cut-off wheel / Diamond wheel
Dual purpose wheel
Inner flange 78 (Australia and New Zealand only) *1
Outer flange 78 (Australia and New Zealand only) *1
Side grip for dust collecting wheel guard *2
Dust collecting wheel guard for cutting-off *2*3
11 ENGLISH
12
13
14
230 mm model
Side grip
Wheel guard (for grinding wheel)
Inner flange
Super flange
Depressed center wheel
Lock nut
Wheel guard (for cut-off wheel)
Diamond wheel
Lock nut wrench
4
6
-