Werbung
Verfügbare Sprachen
Verfügbare Sprachen
22
Detach the filter holder by turning it clockwise. Scrap coffee residue or used E.S.E pod. Extract the filter
cup from the filter holder, rinse them with clean water and dry thoroughly.
DECALCIFYING
23
Descaling is recommended when all indicators blink 5 times with 5 beeps the moment machine is turned
on. Descaling warning will repeat 2 more times each time when you turn on the appliance if you do not
perform descaling or do not cancel by simultaneously pressing
24
Fill the water tank to 300ml level with water and then add the descaling agent (or fill in water and
vinegar 1:1). Use only an environmentally friendly descaling agent and always follow the manufacturer's
instructions. In "pre-heating done" mode when
on, simultaneously press
buttons blinking slowly one after another. When descaling completes, the machine will return to stand-
by mode. Perform step 1-4 twice before using the machine.
Enjoy your new Electrolux product!
TROUBLESHOOTING
PROBLEM
Water leaks from the bottom of coffee
maker.
Water leaks outside of filter cup.
Acid (vinegar) taste exists in espresso
coffee.
The coffee maker cannot work
anymore or does not respond at all.
The steam / milk frothing does not
work properly.
Steam indicator blinking quickly.
www.electrolux.com
and
and
for 3 seconds to start descaling process, during which
POSSIBLE CAUSE
There is too much water in the drip tray.
The coffee maker malfunctions.
There is some coffee powder on filter
edge when locked into the brewing
head.
Didn't perform descaling correctly.
The coffee powder is stored in a hot, wet
place for a long time. The coffee powder
turns bad.
The power outlet is not plugged well.
The white indicator is not illuminated.
The container is too big or the shape
is not fit.
You have used skimmed milk
Make steam for 3 minutes and the steam
knob is not reset.
and
and
for 3 seconds.
and
buttons are steadily and fully light
SOLUTION
Please clean the drip tray.
Please contact with the
authorized service facility for
repairing.
Clear up the coffee powder on
the filter edge.
Clean up machine according to
step 1-4 for "Start the machine
for the first time".
Please use fresh coffee powder,
or store unused coffee powder
in a cool, dry place. After
opening a package of coffee
powder, reseal it tightly and
store it in a refrigerator to
maintain its freshness.
Plug the power cord into an
earthed socket correctly. If
the appliance still does not
work, please contact with the
authorized service facility for
repairing.
Only after the white indicator is
illuminated, the steam station
can be used to perform milk
frothing.
Use high and narrow cup or
professional milk frothing jug.
Use whole milk or half-
skimmed milk.
Reset steam knob to "OFF"
position.
GB
AR
CZ
DE
DK
and
EE
FI
FR
HR
HU
IT
LT
LV
NO
PL
RO
RS
RU
SE
SI
SK
TR
UA
9
Werbung
