Herunterladen Diese Seite drucken

Panasonic MJ-L500 Bedienungsanleitung Seite 6

Vorschau ausblenden Andere Handbücher für MJ-L500:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Electrical Requirement (U.K only)
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a moulded three pin mains plug for your safety and conve-
nience. A 13-amp fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the replacement fuse has a rating
of 13-amp and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark or the BSI mark on the body of the fuse.
If the plug contains a removable fuse cover, you must ensure that it is refitted when the
fuse is replaced.
If you lose the fuse cover, the plug must not be used until a replacement cover is obtained.
A replacement fuse cover can be purchased from your local Panasonic Dealer.
If the fitted moulded plug is unsuitable for the socket outlet in your home, then the fuse
should be removed and the plug cut off and disposed of safely. There is a danger of se-
vere electrical shock if the cut off plug is inserted into any 13-amp socket.
How to replace the fuse
The location of the fuse differs according to
the type of AC mains plug (figures A and B).
Confirm the AC mains plug fitted and follow
the instructions below. Illustrations may
differ from actual AC mains plug.
Open the fuse cover with a screwdriver and
replace the fuse and close or attach the
fuse cover.
GB10
Figure A
Figure B
Figure A
Figure B
Fuse cover
Fuse cover
Parts Names and Handling Instructions
Wash all the detachable parts before using the appliance for the first time or when you have not
used it for a while. (P. GB18)
Food pusher
Feeding tube
Lid
Squeezing Screw
Juice attachment
Filter
Rotating brush
Rubber brush
(two sides)
Juicing bowl
Pulp spout
Motor housing
Mains plug
Accessories
Juice container
Pulp container
Cleaning brush
The tip of the handle can be used to remove
pulp from juice spout or pulp spout.
Frost attachment
Safety lock pin (Upper
motor housing side)
(P.GB14)
Spout cap
Juice spout
Power switch
ON
ON:Presstorunthejuicer.
I
O
OFF:Presslightlytostopthe
R
juicer.
OFF
REVERSE
REVERSE:Pressandholdtoallow
reverse rotation.
(Release finger to stop the juicer.)
•Thisbuttoncanbeusedwhenthe
ingredients are jammed.
Mains lead
GB11

Werbung

loading