IFM Electronic ClassicLine AC5295 Montageanleitung Seite 7

Operation
Avoid build-up of dirt and dust on the upper and lower parts so
that the locking mechanism is not affected.
Check the safe functioning of the unit. LED display:
• LED yellow:
• LED PWR green:
• LED FAULT red is lit:
• LED FAULT red flashes:
• LED 1 yellow:
Overload and short circuit of the input supply and the outputs
are signalled as peripheral fault to the AS-i master (version 2.1 or
higher).
Technical data
You can download the data sheet from our website at
www.ifm-electronic.com if required.
input /output switched
AS-i voltage supply o.k.
AS-i communication error, slave does not
participate in the "normal" exchange of
data, e.g. slave address 0
peripheral fault, e.g. sensor supply /output
overloaded or shorted
logic state of the outputs
7