Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Description of the appliance (Fig. 1-6)
A
The electronic panel enables the selection
of six speeds and the control of the light.
B
LEDs for hood lighting
C
Filters located over cooking area, easily
withdrawn for cleaning.
D
Extractable group that allows a greater
gas capture area.
E
Possibility
of
charcoal filter.
F-G Anti return tabs to be located in the outlet
mouth, locating their ends in the holes
provided.
Instructions for use
To achieve better extraction, we recommend
switching on the extractor a few minutes
before starting to cook (3-5 minutes) so that
the air flow is continuous and stable when
extracting the fumes.
Likewise, keep the extractor switched on for a
few minutes when cooking is complete to allow
all fumes and odours to be expelled.
By pressing the icons in the electronic panel
illustrated in figure 1-A you will be able to
control the following functions of the cooker
hood.
Operating settings
1.- With the Cooker hood at full stop, press the
icon "
" one time to start in first speed.
2.- To increase speed gradually, press the
icon "
" as many times as necessary, until
maximum speed is set.
3.- To set directly the sixth speed (maximum
speed) with the cooker hood at any lower
speed or at full stop, hold down the icon
"
" for 1.5 seconds.
4.- The sixth speed is timed, so the cooker
hood will automatically revert to the fifth
speed after ten minutes.
5.- To reduce the speed gradually, press the
icon "
" as many times as needed.
6.- To turn off the cooker hood directly at any
speed, keep the icon "
seconds.
Programming stop delay timer:
1.- Stop Delay Timer Mode:
a. Open Tray with motors switched on or off
incorporating
activated
" pressed for 1.5
Maintain "
b.
motors passes to the 6
LEDs flicker quickly.
2.- Programming Timer:
Press "
a.
aspiration time. Each LED represents 5
minutes of operating time. The maximum
operating time is 30 minutes (6 LED
switched on).
After 5 seconds of pressing "
b.
"
"
or
key, LED lights start flickering
slower (Stop delay timer Mode).
c. In stop delay timer Mode, speeds can be
adjusted by pressing "
3.– Cancellation of Stop Delay Timer:
Maintain "
a.
motors switch off, or close the tray.
Stop delay timer Mode, is compatible with the
options of Manual or Automatic illumination.
Lighting
You can choose between manual or automatic
lighting:
Manual lighting consists of controlling the
lights by pressing the icon "
Automatic lighting consists of controlling the
lights by pulling and pushing the cooker
hoods handle.
Manual or automatic lighting can be set by
pressing the icon "
The switch from manual mode to automatic
mode is indicated through three flashes of
LED light of speed 1.
The switch from automatic to manual mode is
indicated through three flashes of LED light of
speed 6.
In both cases, lights switch on instantaneously
and dim off progressively.
Cleaning and maintenance
Before
carrying
maintenance
extractor is disconnected from the mains.
To carry out cleaning and maintenance, follow
the Safety Instructions.
16
"
key pressed until
th
speed, and all
" or "
" key to select
" o "
" key pressed until the
".
" for 2 seconds.
out
any
cleaning
activities,
ensure
"
" keys.
or
that
the
Werbung
