Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
3.5 Hydraulic Extraction
18
Design and Function
3
Please secure separate parts against falling off!
Please lubricate the threaded spindle before each use!
Fasten the pressure spring with thrust washer
4925-16 and insert it in the housing 4930-721.
Insert the spindle with thrust washer in the silent
block. From the opposite side, push the housing
4930-721 with thrust washer and spring on the
spindle.
Push the Washer 4925-17 with curvature on the
housing 4930-721 and subsequently tighten the
spindel nut 4925-11 with bearing by hand.
Counter the spindle 4925-14 with a Box-End Wrench
(10 mm) and operate the spindle nut 4925-11 until
the silent block is inserted.
Use spindle 4925-18 with 2 flanged nuts and screw
the adapter 4925-19 in the hollow piston cylinder
4932-17.
USA
Werbung
