BWT Mini Connect Betriebsanleitung Seite 18

• Allow the filtration pump and heat pump to run continuously until the desired temperature is reached (2 days to 1 week depending on
climatic and geographical conditions).
Remember to adjust the flow rate during and at the end of the temperature rise.
The temperature rise time depends heavily on the exposure of the pool to the wind, sun and the nature of its environment.
Maintaining the temperature:
• Once the desired temperature has been reached, you can set the daily filtration time according to your habits (8 to 10 hours per
day minimum during the season).
The heat pump will start automatically whenever necessary. The minimum operating time varies based on the time of use, please
contact your distributor for further information.
If you notice the water temperature of the pool is falling, despite the device operating continuously, increase the daily filtration time.
Do not forget to cover the pool with an insulated cover when you are not using it, to limit heat losses.
IMPORTANT: a swimming pool without a cover will lose 4 times more energy than the same pool with a cover.
The choice of the heat pump should always take into account the presence of a tarpaulin, a rolling shutter, or any other type of protec-
tion of the pool when it is not beign used.
- 18 -