Viessmann TECTOPROMO FL2 AIDA Bedienungsanleitung Seite 4

PI
1. Before you start
Read these instructions carefully. They explain how to install, place, use and service the
cabinet correctly and safely.
Keep these instructions in a safe place and available for other users.
The cabinet must be installed and started up in compliance with the manufacturer's instructions
and in conformance with local instructions and regulations.
If a defect occurs in the cabinet or cabinet equipment, or the cabinet does not operate normally,
check that this does not create a hazard to people or property. If necessary, disconnect the
cabinet and contact the nearest service organisation. All users of the cabinet must be aware of
how to use the cabinet correctly and safely.
1.1. Warranty
Each cabinet has a one (1) year durability and material warranty for normal ambient conditions
(class 3).
Normal ambient conditions must not exceed:
• Relative humidity 60 % RH
• Ambient temperature +25 °C
• Frontal airflow < 0.2 m/s
NOTE The warranty does not extend to any breakage of glass, accidental or otherwise.
2. TectoPromo FL2 Aida
The cabinet is a display case with shelves intended for indoor use only. It maintains the correct
storage temperature for the products.
2.1. Cabinet types
The cabinet has different versions.
• -M version is fitted with an integrated condensing unit.
• -A version is the ambient format of the cabinet.
• -H version is a heated display cabinet. It is equipped with heating resistors installed
inside the base of the tabletops. The heat output of the resistors is controlled by a
thermostat that can be set to the desired temperature. See figure 3 and item F.
Original instructions
ENGLISH
2