SKYTRONIC 351.180 Betriebsanleitung Seite 9

Setup Record:
Basic tab: Allows you to choose the size, compression, frame rate (No. of images per second), sound recording/no sound
recording (if an audio source is connected to RCA (phono) inputs 1 to 4 - option not available for the other channels).
Recording schedule tab: Used for programming the recording time slots for each of your cameras. Select the desired channel,
then click on the Set button for the relevant day. Pre-Recording time: Field shows the length of the recording prior to triggering.
For example, if you activate recording on motion detection with 5 seconds of pre-recording time, your recording will also include
the 5 extra seconds before the movement which triggered the recording.
Setup Network:
Provides access to all the settings related to communication over the internet.
Basic tab: You can manually configure your recorder's (wired) network properties if you connect an internet access cable to the
network socket. Tick DHCP if you want all the settings to be entered automatically.
Advanced tab: This provides access to the advanced network settings.
Important notes:
- You can use this tab to configure the email alerts and FTP server connection by clicking on the relevant buttons.
- Other settings accessible here require advanced networking knowledge and are only of use under special circumstances.
These settings should only be changed if absolutely necessary.
Network State tab: Shows the current network settings.
P2P tab: Allows you to activate the plug and play feature so that you can access your video surveillance kit from any computer or
your smartphone or tablet.
Important note: The ID and password you will need for remote viewing are provided here.
EN