SKYTRONIC 351.180 Betriebsanleitung Seite 5

17. RS232/RS485 terminal block for controlling PTZ cameras
18. Colour LCD screen
19. Infrared receiver for the remote control (included)
20. System on indicator light.
1.3Back Panel Instructions
Instruction: Different models with different functions, please in kind prevail, details please refer to following table.
Identification
Video in
Audio in
Video out
Audio out
HDMI
Video spot
USB
LAN
485+、485-
DC/AC
Power
1 - Contents of the kit
1. 19'' LCD DVR COMBO
2. Hard Disk Mounting Hardware Packet
3. Remote control
4. USB mouse
5. Video cameras
6. Adapter 12V DC
1 – Installing the monitor
The monitor included in your video surveillance kit is equipped with a swiveling base which can either be fixed to a vertical or
horizontal bracket. Vertical installation requires 4 screws and wall plugs (not included) to suit the bracket type.
Warning: If mounting the unit on a wall, ensure appropriate wall plugs for the bracket (capable of supporting over 5.8 kg in
weight) are used.
2 - Installing the cameras
• The cameras can be fitted either to a wall or the ceiling.
• Undo the 2 camera screws to angle them as required. Tighten them again when you are happy with the adjustment.
• Mount the cameras using screws and wall plugs that are appropriate to the type of bracket (the screws and wall plugs provided
are suitable for solid walls).
• Ensure the cameras are properly secured to prevent them from falling.
Accessing the display settings
To access the monitor settings, press the MENU key on the front of the monitor. When you press the key, the following settings
will be displayed:
Name
Video input
Audio Input
Video output
Audio output
HDMI port
Video AUX output
USB port
LAN port
RS-485 port
Power input
Power switch
Description
1-8CH multi-channel video input（BNC）
1-8CH multi-channel audio input（RCA）
Video output
Audio output
HDMI output
AUX output video, not support menu operation
USB2.0，used for USB mouse, USB memory stick,
10/100M Adaptive Ethernet Card（RJ45）
PTZ control
DC 12V/4A,
Power on/off