SKYTRONIC 351.180 Betriebsanleitung Seite 15

To view your camera feeds remotely, log on to the www.vssweb.net website. Depending on what equipment and browser you
are using, you may be asked to install an additional module: If this is the case, you should accept the request.
Comment: If your browser refuses to connect or the module needs to be installed, please contact your network administrator or
switch to a Firefox or Chrome browser. Once you have logged on with your ID and password, the home page will be displayed.
3 - REMOTE VIEWING USING A SMARTPHONE OR TABLET
A simplified version of the interface can be downloaded from the App Store or Google Play. Install the IMSeye app on your
smartphone or tablet:
Click on the 'add device' button to bring up the ID and password of your video surveillance kit: Once confirmed, click on the
name of your device to display the list of cameras: Next, click on the requisite camera to start displaying its feed: Although you
can connect up to 4 cameras at the same time, a good internet connection is needed. to maintain acceptable quality and frame
rate when 4 camera feeds are being transmitted at the same time. Screen currently selected list of cameras connected to your
video surveillance kit. Click on one of these dots to display the feed from the corresponding camera in the screen currently
selected. Click on 'Master stream' to display (or stop displaying) the feeds from all of your cameras in the order of your video
surveillance kit. You can select a different screen arrangement here should you wish to. Device name (of your choosing) Select
P2P If you are near your video surveillance kit, you can click here to scan the QR code for your video surveillance kit to avoid
having to enter its ID and password.
Identifiant [ID]: enter your Device ID here
[Password]: type in the password you entered in your video surveillance kit settings.
Technical and legal information
Functional characteristics
19'' video surveillance kit
• Can be installed vertically (fixed to a wall).
• Up to 8 wired cameras can be connected via BNC
• RS485 PTZ cameras can be installed and motorized.
• The entire system can be controlled by the remote control included in the kit or using a wired mouse.
• Several user accounts can be configured.
• The images can be displayed on an HDMI screen or on monitors (using the BNC output).
• Option to record onto a SATA hard disk or a USB key.
• Manual or programmed recording over a given period.