Makita DGA417 Betriebsanleitung Seite 26

MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed before
attempting to perform inspection or maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
COMBINATION OF APPLICATIONS AND ACCESSORIES
Optional accessory
CAUTION:
Using the tool with incorrect guards can cause risks as follows.
When using a cut-off wheel guard for facial grinding, the wheel guard may interfere with the workpiece causing poor control.
•
• When using a grinding wheel guard for cutting-off operations with bonded abrasive wheels and dia-
mond wheels, there is an increased risk of exposure to rotating wheels, emitted sparks and particles,
as well as exposure to wheel fragments in the event of wheel burst.
• When using a cut-off wheel guard or grinding wheel guard for facial operations with cup-type dia-
mond wheels, the wheel guard may interfere with the workpiece causing poor control.
• When using a cut-off wheel guard or grinding wheel guard with a wheel-type wire brush with a thickness greater than the
maximum thickness as specified in "SPECIFICATIONS", the wires may catch on the guard leading to breaking of wires.
• Use of dust collecting wheel guards for cutting-off and facial operations in concrete or masonry
reduces a risk of exposure to dust.
When using dual purpose (combined grinding and cutting-off abrasive) flange mounted wheels, only
•
use a cut-off wheel guard.
2
2
3
3
7
4
8
5
6
5
-
1
2
9
2
12
10
11
Application
-
-
Air vent cleaning
The tool and its air vents have to be kept clean.
Regularly clean the tool's air vents or whenever the
vents start to become obstructed.
► Fig.52: 1. Exhaust vent 2. Inhalation vent
Remove the dust cover from inhalation vent and clean it
for smooth air circulation.
► Fig.53: 1. Dust cover
NOTICE:
clogged with dust or foreign matters. Continuing
operation with a clogged dust cover may damage the
tool.
15
14
13
3
16
5
6
100 mm model
Wheel guard (for grinding wheel)
26 ENGLISH
Clean out the dust cover when it is
19
2
18
17
3
20
16
17
5
5
6
115 mm model
Side grip
21
3
3
22
5
6
6
125 mm model