Novoferm N-423 Bedienungsanleitung Seite 83

14 Declaration of conformity and incorporation
14.1 Declaration of Incorporation in accordance with the
EC Machinery Directive 2006/42/EC
Manufacturer's declaration of incorporation (translation of the original)
For the installation of partly completed machinery in terms of the EC Machinery Directive 2006/42/EC,
We hereby declare that the following partly completed machinery – as far as possible with respect to
the scope of supply – complies with the essential requirements of the EC Machinery Directive. The
partly completed machinery is only intended to be incorporated into a door system in connection with
the door drives specified below, to thus form a complete machine within the meaning of the
EC Machinery Directive. The door system must not be put into service until the final machinery has
been declared in conformity with the provisions of the EC Machinery Directive and the EC Declaration
of Conformity according to Annex II A is available. We furthermore declare that the relevant technical
documentation for this partly completed machinery has been compiled in accordance with Annex VII,
Part B, and undertake to transmit it through our Documentation Department in response to a
Product model / product:
Product type:
Year of manufacture from:
Relevant EC/EU directives:
Fulfilled requirements of the
EC Machinery Directive
2006/42/EC, Annex I, Part 1:
Applied harmonised standards:
Other applied technical
standards and specifications:
Manufacturer and name of the
authorised representative of the
technical documentation:
Place and date of issue:
14.2 Declaration of Conformity according to Directive 2014/53/EU
The integrated radio system complies with directive 2014/53/EU. The full text of the declaration of con-
formity can be found at:
https://www.tormatic.de/dokumentation/
Annex II Part 1 Section B
reasoned request by the competent national authorities.
N-423
Garage drive
2019
2014/30/EU
2011/65/EU RoHS Directive including Annex II according to
(EU) 2015/863
1.1.2, 1.1.3, 1.1.5, 1.2.1, 1.2.2, 1.2.3, 1.2.4, 1.2.5, 1.2.6, 1.3.2,
1.3.4, 1.5.1, 1.5.4, 1.5.5; 1.5.6, 1.6.1, 1.6.2, 1.6.3; 1.7
EN ISO 12100:2010; EN ISO 13849-1:2015, PL "C" Cat. 2;
EN 60335-1:2012/AC:2014; EN 60335-2-95:2015-01 / A1:2015-06;
EN 61000-6-3:2007 / A1:2011;
EN 61000-6-2:2005 / AC:2005
EN 12453:2019; EN 300220-1:2017-05; EN 300220-2:2017-05;
EN 301489-1:2017
Novoferm tormatic GmbH
Eisenhüttenweg 6
44145 Dortmund
Dortmund,
Dirk Gößling, Managing Director
24.11.2018
EN - 81