Siemens RDE100 Serie Bedienungsanleitung Seite 8

Do you want to enter your own time switch?
EN
Option 1: Time switch with individual day selection (P11=0)
set
ok
+
–
mode
10) Press mode or wait for the program to exit
6
You can select Comfort mode or Economy mode at 15
minute intervals throughout the day. The 0:00 to 24:00
hour time bar allows you to set the operating mode for
the selected day(s).
Example:
1
0 6

Visible bars: Control to Comfort temperature

Invisible bars: Control to Economy temperature
When Auto timer mode is enabled, changeover
between the operating modes is automatic after the
settings are saved.
Proceed as follows:
1) Press set and select
2) Press ok to confirm.
3) Time switch for day Mon(1) is displayed.
+ –
4) Press or
Sun(7).
5) Press ok to confirm the selection and initiate time
programming.
During programming step:
6) Press mode to select an operating mode, (Comfort
or Economy) or
+ –
7) Press or
minutes for the selected mode.
8) Press ok to save the time switch.
9) Repeat steps 4-8 for all remaining days (if required);
or
automatically.
2
1 8
1 2
.
AUTO
to select the day, from Mon(1) to
to adjust the time setpoint by 15
2 4
CB1B1422