Siemens RDE100 Serie Bedienungsanleitung Seite 5

Do you want to adjust the time and day?
set Proceed as follows:
•
ok
•
+
•
–
•
mode
•
•
•
Do you want to lock the buttons?
Press and hold mode for at least 7 seconds to activate a
mode
button lock. Repeat to unlock.
The unit operates normally when the buttons are locked,
but no changes are possible while the buttons are
locked.
Are your rooms too warm/too cold?
Press + or – to increase or decrease the room
+
temperature setpoint in increments of 0.5 ° C / 1 ° F.
–
Proceed as follows:
ok
•
set
mode
•
•
CB1B1422
Press set and select
Press ok and the time flashes for setting
+ –
Press or to adjust the time
Press ok to confirm
The weekday flashes, press
desired day
Press ok to save the value
Press mode to exit or wait for the program to exit
automatically
+ –
Press or to adjust the setpoint temporarily.
This adjustment is reset as soon as the
operating mode changes.
Press ok, set or mode to save the value or wait
for the program to exit automatically
To lock the setpoints, use parameters P06 and
P08.
+ –
or to select the
EN
3