Finlux FL3223SMART Bedienungsanleitung Seite 28

Connectivity
Wired Connectivity
To Connect to a Wired Network
You must have a modem/router connected to an
of your TV.
Broadband ISP connection
LAN (ethernet) cable
LAN input on the rear
side of the TV
System>Settings Menu.
a case, use an ethernet cable to connect your TV
network
wall socket
LAN input on the rear
side of the TV
Network Type
The Network Type can be selected as Wired Device,
Wireless Device or Disabled, in accordance with the
active connection to the TV set. Select this as Wired
Device if you are connecting via an ethernet cable.
Internet Speed Test
Internet Speed Test and press the OK button.
Advanced Settings
Advanced and press the OK button.
On the next screen you can change the IP and DNS
to Manual. Now you can enter the Manual IP and
/ or Manual DNS
Wireless Connectivity (optional)
To Connect to a Wireless Network
The TV cannot connect to the networks with a hidden
SSID. To make your modem's SSID visible, you should
change your SSID settings via the modem's software.
38. Then connect the wireless adaptor to one of the
USB inputs of the TV.
39.
to the Network/Internet Settings section in the
System>Settings Menu.
Broadband ISP
connection
Wireless LAN
adaptor
USB inputs on the
rear left side of the TV
A Wireless-N router (IEEE 802.11a/b/g/n) with
simultaneous 2.4 and 5 GHz bands is designed to
increase bandwidth. These are optimized for smoother
wireless gaming.
the area.
English - 53 -
Automa-
OK button to
You must change your modem's SSID when there are
of the USB ports. Open the
menu and select Network Type as
Note:
mode settings.
the OK button on the remote control.
Type
.
Internet Speed Test and press the OK button
Advanced
buttons to set. Press the OK
when complete.
Connected or Not Connected and the current IP
Enter the
If available, you can download a virtual remote
controller application from the server of your mobile
device application provider.
Note: This feature may not be supported on all mobile
devices.
Wake ON
Wake-on-LAN (WoL) is a standard that allows a device
to be turned on or woken up by a network message.
The message is sent to the device by a program
executed on a remote device connected to the same
local area network, such as a smartphone.
to
Your TV is WoL compatible. To enable this feature set
the Wake On option in the Network/Internet Settings
menu as On. It is necessary that both the device, from
which the network message will be sent to the TV, and
the TV are connected to the same network. Wake On
feature is only supported for Android OS devices and
In order to use this feature the TV and the remote
device should be connected at least once while the TV
reestablished, the next time it is switched on. Otherwise
this feature will be unavailable. This does not apply,
when the TV is switched into the standby mode.
The performance of some devices in the market, may
Network
vary due to the software architecture. In order to use
Wake On feature with a better performance, please
Connectivity Troubleshooting
Wireless Network Not Available
and press the OK button to open
TV wireless connection.
If the wireless network does not function properly, try
using the wired network in your home. Refer to the
Wired Connectivity section for more information on
the process.
check the modem (router). If the router does not have a
Connection is Slow
English - 54 -
of your TV.
menu and the playback
OK
menu screen.