Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Power Up Mode
available.
Virtual Remote
Enable or disable the virtual remote feature.
With this setting you can enable and disable CEC functionality completely. Press Left or
CEC
Right button to enable or disable the feature.
This function allows the connected HDMI-CEC compatible device to turn on the TV and switch
CEC Auto Power On
to its input source automatically. Press Left or Right button to enable or disable the feature.
To hear the TV audio from the connected compatible audio device set as
Speakers
use the remote control of the TV to control the volume of the audio device.
(*)
(*)
OSS
Displays Open Source Software license information.
(*)
Installation Menu Contents
Automatic
Displays automatic tuning options. Digital Aerial: Searches and stores aerial DVB stations. Digital
channel scan
Cable: Searches and stores cable DVB stations. Analogue: Searches and stores analogue stations.
(Retune)
Manual channel
This feature can be used for direct broadcast entry.
scan
Network
Searches for the linked channels in the broadcast system. Digital Aerial: Searches for aerial
channel scan
network channels. Digital Cable: Searches for cable network channels.
tune
analogue channels are stored.
Displays installation settings menu. Standby Search(*): Your TV will search for new or missing channels
while in standby. Any new found broadcasts will be shown. Dynamic Channel Update(*): If this option
Installation
is set as Enabled, the changes on the broadcasts such as frequency, channel name, subtitle language
Settings
etc., will be applied automatically while watching.
(Optional)
(*) Availability depends on model.
Clear Service
Use this setting to clear channels stored. This setting is visible only when the Country option is set to
List
Denmark, Sweden, Norway or Finland.
Select Active
This setting allows you to select only the broadcasts within the selected network to be listed in the
Network
channel list. This feature is available only for the country option of Norway.
First time
Deletes all stored channels and settings, resets TV to factory settings.
installation
Last State and Standby options are
English - 45 -
General TV Operation
Using the Channel List
The TV sorts all stored stations in the Channel List.
You can edit this channel list, set favourites or set
active stations to be listed by using the Channel List
options. Press the OK button to open the Channel
List
Blue button or open the Edit Channel List menu by
. You can
pressing the Green button in order to make advanced
changes in the current list.
Managing the Favourite Lists
channels. Enter the Channel List in the main menu
or press the Green button while the Channel List
.
is displayed on the screen in order to open the Edit
Channel List menu. Select the desired channel on the
list. You can make multiple choices by pressing the
Yellow button. Then press the OK button to open the
Channel Edit Options menu and select Add/Remove
Favourites option. Press the OK button again. Set the
desired list option to On. The selected channel/s will
be added to the list. In order to remove a channel or
channels from a favourite list follow the same steps
and set the desired list option to
You can use the Filter function in the Edit Channel
List
permanently according to your preferences. Using this
Filter option, you can set one of your four favourite lists
to be displayed everytime the Channel list is opened.
not remain the next time the Channel list is opened if
you don't save them. To save the changes on the list
press the Red
list is displayed on the screen.
The Parental Settings menu options can be used to
prohibit users from viewing of certain programmes,
channels and using of menus. These settings are
located in the System>Settings>Parental menu.
To display parental lock menu options, a PIN number
should be entered. After coding the correct PIN
number, Parental Settings menu will be displayed.
Menu Lock: This setting enables or disables access
to all menus or installation menus of the TV.
Maturity Lock: If this option is set, TV gets the maturity
information from the broadcast and if this maturity level
is disabled, disables access to the broadcast.
Note:
set to 18 as default.
Child Lock: If this option is set to ON, the TV can only
be controlled by the remote control. In this case the
control buttons on the TV will not work.
Internet Lock: If this option is set to ON, the open
browser application in the portal will be disabled. Set
to OFF to release the application again.
Set PIN:
Default CICAM PIN: This option will appear as greyed
out if no CI module is inserted into the CI slot of the
TV. You can change the default PIN of the CI CAM
using this option.
Note:
selection) during the First Time Installation
Some options may not be available depending on the model
and/or on the country selection in the First Time Installation.
Electronic Programme Guide (EPG)
Some channels send information about their broadcast
schedules. Press the Epg button to view the
Programme Guide menu.
There are 3 different types of schedule layouts
available, Timeline Schedule, List Schedule and
Now/Next Schedule. To switch between them follow
.
the instructions on the bottom of the screen.
Timeline Schedule
Channel list
Zoom (Yellow button): Press the Yellow button to
see events in a wider time interval.
Filter (Blue button):
Select Genre (Subtitles button): Displays Select
Channel list menu will only
Genre menu. Using this feature, you can search the
Channel list in order to
programme guide database in accordance with the
genre. Info available in the programme guide will be
searched and results matching your criteria will be
highlighted.
Channel
Options (OK button): Displays event options.
Event Details (Info button): Displays detailed
information about selected events.
Next/Prev Day (Programme +/- buttons): Displays
the events of previous or next day.
Search (Text button): Displays Guide Search menu.
Now (Swap button): Displays current event of the
highlighted channel.
Rec./Stop (Record button): The TV will start to record
the selected event. You can press again to stop the
recording.
IMPORTANT: Connect a USB disk to your TV while the TV
the recording feature.
Note:
available during a recording.
List Schedule(*)
First Time Installation is
(*)
Maturity Lock's value will be
Prev. Time Slice (Red button): Displays the events
of previous time slice.
English - 46 -
0000 or 1234
.
Werbung
