AlzaPower APW-PBPA20PD Bedienungsanleitung Seite 8

INSTRUCTIONS
You can charge your device using the USB-A output ports or the USB-C port.
• Plug one end of the power cable into the USB power port of your device and connect the
other end to the power bank's output port.
• Press the on/off button to start charging.
• Depending on the charge status of the power bank, the corresponding number of LED
indicators will light up. As the connected device charges, the power bank's LED indica-
tors will gradually turn off. When all LED indicators go out, the power bank is completely
discharged.
8 ENGLISH