Herunterladen Diese Seite drucken

Levoit True HEPA Bedienungsanleitung Seite 8

Vorschau ausblenden Andere Handbücher für True HEPA:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 16
EN
GETTING STARTED (CONT.)
3.
Replace the filter cover and twist
clockwise to lock.
4.
Place the purifier on a flat, stable surface
with the display facing up. Allow at least
38 cm / 15 in of clearance on all sides
of the purifier. Keep away from anything
that would block airflow, such as curtains.
[Figure 1.4]
38 cm /
15 in
8
[Figure 1.3]
cover should
snap shut
Figure 1.3
38 cm /
15 in
Figure 1.4
U S I N G YO U R
P U R I F I E R
1.
Plug in and tap
to turn on the purifier.
The fan will start on level I.
2.
Optionally, tap
to change fan speed
between I, II, and III.
Note:
The indicators are not buttons and
cannot be used to change the fan
speed.
The fan speed indicators will light up
when active.
Fan speed III is the loudest, but cleans
air the quickest.
For best results, or to address a specific
air quality issue such as smoke, run the
air purifier at high speed (level III) for
15–20 minutes before using a lower
speed.
To effectively clean air, keep windows
and doors closed while the air purifier
is on.
3.
Tap
to turn off the air purifier.
Figure 2.1
Memory Function
When the air purifier is plugged in, it will
remember its previous fan speed setting.
Note: The air purifier will not remember timers or
Sleep Mode.
[Figure 2.1]

Werbung

loading

Diese Anleitung auch für:

Core 300-rac