Electromagnetic Compliance (Emc) - Gastroback Design LED Light & Charge Bedienungsanleitung

power adapter. Thereafter, wipe dry and let dry naturally for at
least 1 day.
• Power cords may never be knotted, twisted, pulled, strained or
squeezed. Do not let any power cord (e.g. 12V power cable of
the power adapter) hang over the edge of the table or counter or
touch hot surfaces or sharp edges. Ensure that no one will pull the
appliance by the power cord. Take care not to entangle in the
power cord. • Do not use any hard or sharp-edged objects with
the appliance to avoid scratching on the surfaces of the appliance.
The wireless ports (Qi wireless port, external wireless receiver) of
the light are insulated against metal objects and will be inflected
seriously with the insulation damaged.

ELECTROMAGNETIC COMPLIANCE (EMC)

Wireless ports transfer the energy, necessary for operating / char-
ging other devices like mobile phones, via electromagnetic radia-
tion. Most people are already familiar with this technology, and
use it in state-of-the-art devices for computers, remote control sys-
tems, and telecommunication. According to the present-day level of
research this technology is recognized as safe and may be used
in various fields.
• However, persons exceptionally sensitive to electromagnetic
radiance may be influenced in their health and well-being. These
persons should not operate any type of wireless operated devices
within their close environment. If in doubt, unplug the power adap-
ter to stop the emission of radiation.
• Do not operate the light and other electronic devices (e.g. tele-
vision, computer) close together to avoid interference.
• Do not operate the light on a metal surface or place any foreign
metal objects on or close to the appliance to avoid interference and
useless energy loss.
32