Gastroback Design LED Light & Charge Bedienungsanleitung Seite 43

Problem Possible
Reason
The power/char- The wireless tech-
ging indicator tur- nology of your
ned red after the mobile phone and
charging process, the Qi wireless port
but the batteries of the light may be
of your mobile incompatible.
phone are not
The rechargeable
charged.
batteries of your
device are exhau-
sted or defective.
Interference with
any foreign metal
objects near the Qi
wireless port.
The optional exter-
nal wireless recei-
ver of the light is
not or not correctly
placed on the char-
ging area.
The distance bet-
ween the device
and the charging
area of the Qi wire-
less port is to long.
Malfunction has
occurred.
The Solution
Before connecting your device to the ports of the light, always
check the compatibility of the energy transfer systems. Do not
attempt to charge any incompatible device via any ports of the
light to avoid damage.
Get in contact with an authorized service centre of your device
for examination and/or replacement of the batteries.
The Qi wireless port induces eddy currents within any metal
objects. This will happen in competition with the charging
process. Therefore, foreign metal objects near the Qi wireless
port or external wireless receiver may prevent any charging
process. If in doubt, remove any sleeves and cases from your
mobile phone before wireless charging.
When using the external wireless receiver of the light, this
optional accessory must be placed onto the charging area and
the device to be charged must be connected to the external
wireless receiver. Additionally, try again after turning the exter-
nal wireless receiver upside down.
Ensure to place your device to be charged directly onto the
charging area. If in doubt, remove any cases, removable
covers, and sleeves before charging. Then try again.
Immediately remove the device from the charging area and
get in contact with an authorized service centre.
43