Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Child Lock
With the Child Lock function, you can
prevent children from tampering with
the machine. Thus you can avoid any
changes in a running programme.
C
You can switch on and off the
machine with
when the Child Lock is active.
When you switch on the machine
again, programme will resume
from where it has stopped.
To activate the Child Lock:
Hold down the button for the
Auxilliary Function for 3 seconds.
"Child Lock Enabled (CL On)" appears
on the display after the countdown as
"3_2_1" in the programme selection
display on the panel. When this
warning appears, the
Function
button can be released.
To deactivate the Child Lock:
Hold down the button for the
Auxilliary Function for 3 seconds.
After the countdown as "3_2_1" on the
programme selection display on the
panel is over, "Child Lock Enabled (CL
Off)" symbol turns off.
Cancelling the programme
The programme is cancelled when the
machine is turned off and on again.
Press and hold
seconds.
C
If you press
the Child Lock is enabled, the
programme will not be cancelled.
You should cancel the Child Lock
first.
C
If you want to open the loading
door after you have cancelled the
programme but it is not possible
to open the loading door since the
water level in the machine is above
the loading door opening, then
turn the
knob to
and discharge the water in the
machine.
On / Off
button
1st
1st Auxilliary
1st
On / Off
button for 3
On/Off
button when
Programme Selection
Spin + Drain
programme
End of programme
Once the programme is completed,
End LED will light up.
If you do not press any button for 10
minutes, the machine will switch to
OFF mode. Display and all indicators
are turned off.
When you press On/Off button, the
completed programme steps will be
displayed.
Setting volume level
Low volume and high volume
To modify the volume, hold down the
2nd Additional Function button for 3
seconds.
Your machine is equipped
with a "Standby Mode"
In case of not starting any programme
or waiting without making any other
operation while the machine is in the
selection step after it is turned on by
On/Off button or if no other operation
is performed approximately 10 minutes
after the programme you selected has
come to an end, your machine will
switch to OFF mode. Display and all
indicators are turned off. When you
press On/Off button, information about
the selected programme is displayed.
Please check the correctness of
your selections before starting the
programme. Readjust if necessary.
This is not a failure.
EN
DE
69
Werbung
