Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Electrical connection
Connect the product to a grounded
outlet protected by a 16 A fuse. Our
company shall not be liable for any
damages that will arise when the
product is used without grounding in
accordance with the local regulations.
• Connection must comply with
national regulations.
• The wiring for the electrical
outlet circuit must be sufficient
to meet the appliance
requirements. Use of a Groud
Fault Circuit Interrupter (GFCI) is
recommended.
• Power cable plug must be within
easy reach after installation.
• If the current value of the fuse
or breaker in the house is less
than 16 Amps, have a qualified
electrician install a 16 Amp fuse.
• The voltage specified in the
"Technical specifications" section
must be equal to your mains
voltage.
• Do not make connections via
extension cables or multi-plugs.
B
WARNING:
cables must be replaced by the
Authorized Service Agents.
Damaged power
Transportation of the product
• Unplug the product before
transporting it.
• Remove water drain and water
supply connections.
• Drain all water that has remained
in the product.
• Install transportation safety bolts
in the reverse order of removal
procedure; .
C
Never move the product without
the transportation safety bolts
properly fixed in place!
A
WARNING:
are dangerous to children. Keep
packaging materials in a safe place
away from reach of the children.
Packaging materials
EN
DE
55
Werbung
