Bamo NivOil Bedienungsanleitung Seite 27

ALARM OIL,HIGH LEVEL AND SLUDGE PROBE (continued)
Alarm message oil probe (NivOil OP) and high level probes (NivOil HP / HPS)
Case 3: Alarm was acknowledged and continues to apply → after about 24 hours, the buzzer is triggered anew and the red LED starts blinking
again.
AUDIBLE ALARM
The buzzer can be switched off permanently with DIP switch 1 on the circuit board in the control unit.
The alarm is then only signalled visually and via the built-in alarm relays.
Caution!
Before opening the enclosure → Switch off mains voltage!
EN
M-531.01-EN-AK du 30-06-2023 - Manufacturer : BAMO IER - Pirnaer Straße 24, D-68309 Mannheim - Germany (Translated document)
ON
ALARM
OFF
ON
LED
green
OFF
ON
LED
red
OFF
ON
Audible
alarm OFF
ON
Relay
OFF
ON
Reset
OFF
24 hours
later
Blinking
·
Time
DP0038