Bamo NivOil Bedienungsanleitung Seite 26

ALARM UNIT WITH OIL, HIGH LEVEL AND SLUDGE PROBE (continued)
Alarm message oil probe (NivOil OP) and high level probes (NivOil HP / HPS)
Please note:
To avoid false alarms, an alarm is only signalled after it has been on for more than 10 seconds.
Case 1: Alarm comes and disappears again by itself (for example due to wave movement of the liquid surface), the blinking green LED is then
acknowledged with the RESET button.
Case 2: Status alarm is ON and keeps on → Press RESET button to reset the alarm. The red LED shuts Off when the alarm disappears.
EN
M-531.01-EN-AK du 30-06-2023 - Manufacturer : BAMO IER - Pirnaer Straße 24, D-68309 Mannheim - Germany (Translated document)
ON
ALARM
OFF
ON
LED
green
OFF
ON
LED
red
OFF
ON
Audible
alarm
OFF
ON
Relay
OFF
ON
Reset
OFF
ON
ALARM
OFF
ON
LED
green
OFF
ON
LED
rot
OFF
ON
Audible
alarm
OFF
ON
Relay
OFF
ON
Reset
OFF
Blinking
Blinking
Blinking
·
DP0036
Time
Time