Dmx Mode - EuroLite LED PST-15W MK2 COB Bedienungsanleitung

DMX MODE

The Control Board allows you to assign the DMX fixture address, which is defined as the first channel from
which the device will respond to the controller.
Setting the DMX Starting Address:
Press the MODE button until the OLED display shows DMX MODE. Press the ENTER button. You can now
select the desired DMX address via the UP or DOWN buttons.
Confirm your choice by pressing ENTER.
Please, be sure that you don't have any overlapping channels in order to control each LED PST-15W MK2
COB RGBW Floor Spot/Wash correctly and independently from any other fixture on the DMX-chain. If
several LED PST-15W MK2 COB RGBW Floor Spot/Wash are addressed similarly, they will work
synchronically.
Controlling:
After having addressed the LED PST-15W MK2 COB RGBW Floor Spot/Wash, you may now start operating
it via your lighting controller.
The individual channels and their features are listed under DMX-protocol.
Setting DMX channel mode:
The device has 3 DMX channel modes.
Press the MODE button until the display shows CHANNEL. Press the ENTER button.
You can select the DMX channel mode CH04, CH06 or CH07 via the UP or DOWN buttons.
Confirm your choice by pressing ENTER.
DMX Protocol
4-channel mode:
Channel: Value:
1 000 – 255
Channel: Value:
2 000 – 255
Channel: Value:
3 000 – 255
Channel: Value:
4 000 – 255
Function:
Red (0 – 100%)
Function:
Green (0 – 100%)
Function:
Blue (0 – 100%)
Function:
White (0 – 100%)
27/30 00099143, Version 1.1