EuroLite LED PST-15W MK2 COB Bedienungsanleitung Seite 25

Mode
DMX
CHANNEL
SLAVE
PROGRAMS
SOUND
IR REMOTE
FIXTURE ID
DIMMER
Solid colors / Internal programs
A chaser is a sequence of different steps that will be called up one after another in a continuous loop. With
the LED PST-15W MK2 COB RGBW Floor Spot/Wash, you can select up to 3 different chasers plus solid
colors.
Selecting a chaser
Press the MODE button to select the internal program mode. Select the desired solid color or chaser (01 –
04) via the UP or DOWN buttons (see following graphic).
Press the ENTER button to select brightness of the solid colors, speed and flash settings, respectively. As
soon as the digits blink, you can select the desired values via the UP or DOWN buttons.
Speed (SP) from 00 to 99, increasing.
Flash (F) from 00 to 99, increasing.
Please press the ENTER button to confirm and to exit this mode.
01.STATIC
02.CHANGE-15
03.CHANGE-4
04.DREAM-15
Display Function
ADDR: 001 ~ 512 DMX address setting
CH:04
Setting DMX channel mode
CH:06
CH:07
SLAVE Slave setting
01 ~ 04 See graphic below
Microphone sensitivity
SENS: 00 ~ 31
Sound controlled mode (increasing sensitivity)
Control via IR remote
ON
:enable
Control via IR remote
OFF
:disenable
Password 000-
255
Password: 050
RDM ID 0000-
9999
RESPONO1 Dimmer speed 1 = LED
RESPONO2 Dimmer speed 2 = Halogen
R00 G00 B00 W00 F00
Fifteen color change
Four color change
Fifteen color fade
SP01-99 F00-99
SP01-99 F00-99
SP01-99 F00-99
25/30 00099143, Version 1.1