Werbung
Verfügbare Sprachen
Verfügbare Sprachen
How to run a wash cycle
50
Prewash (Vorwäsche)
Prewash at around 30°C before the main wash cycle which then proceeds
automatically.
Stain (Flecken)
For very dirty or stained washing. A stain removing product can be poured
into the prewash compartment
in the product dispenser.
Sensitive (Sensitiv)
Rinsing action increased by an additional rinse cycle with, at the same time,
reduced drum movement (fabric protection). Ideal for frequent washes, for
example, in the case of very sensitive skin (not compatible with the Rinse plus
option).
Time saving (Zeitsparen)
This function allows you to reduce the length of the cycle depending on the
type of programme selected.
Rinse plus (Extra Spülen)
This option means one or more rinses can be added to the programmes Cot-
ton, Synthetics and Delicates (not compatible with the Sensitive option).
You are able to activate it permanently by proceeding in the following way :
Press the SPIN (U/MIN) and PREWASH (VORWÄSCHE) buttons for a few se-
conds. The RINSE PLUS (EXTRA SPÜLEN) indicator lights up. The option is per-
manently activated, even if the appliance is switched off.
To deactivate permanently, repeat the same operation.
If the option selected is not possible, "Err" is displayed in the display window
and the indicator for the START/PAUSE (START/PAUZE) button flashes in yel-
low.
Selecting a start delay
This option allows you to delay the start
of a wash programme by 30, 60, 90, 2
hours to 20 hours.
Press the DELAY START (ZEITVORWAHL)
button until the display window indica-
tes the period at the end of which you want the programme to start (0' indi-
cates immediate start). The corresponding symbol is displayed in the display
window.
Werbung
