Werbung
Verfügbare Sprachen
Verfügbare Sprachen
washing machine off (it is on in all the other positions). This programme dial
can be turned to the right or to the left.
If the programme dial is turned while the washing machine is on a washing
cycle, the error code "Err" appears in the display window and the START/PAU-
SE (START/PAUZE) button flashes in yellow for a few seconds. The programme
then continues without taking any notice of the new position of the dial. To
remedy the problem, put the dial back to its initial position. The breakdown
of the cycle phases reappears in the display window.
Selecting the spin speed
Press the SPIN (U/MIN) button until the
indicator for the desired spin speed li-
ghts up. You can also select the NO
SPIN*, RINSE HOLD
CE PLUS*.
The maximum speeds are :
for Cottons, 40-60 Mix, Eco : 1300 rpm,
for Synthetics, Easy Iron Plus, Delicates, Wool Plus, 30 Min : 900 rpm.
At the end of the programme, if you have selected RINSE HOLD or NIGHT SI-
LENCE PLUS, you then need to select a SPIN or DRAIN programme to finish
the cycle.
RINSE HOLD (SPÜLSTOPP)
The last rinse water is not drained at the end of the selected programme to
avoid creasing the washing if it is not taken out of the drum immediately.
Selecting options
Options can be added to a wash pro-
gramme that has already been selected.
Press the button for the desired option.
The corresponding indicator lights up.
To deactivate an option, do the same
thing. The corresponding indicator goes
out.
* depending on model
*
or NIGHT SILEN-
How to run a wash cycle
49
Werbung
