Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.2. Tuningmode
Activating the tuning mode:
1.
Switch on e-bike → [Display stays at 0.0
2.
Switch off the e-bike after it has started up completely, wait at least 5 seconds.
3.
Switch on e-bike → [Display shows 10.0
value), tuningmode]
Speed representation: The speed actually driven remains readable in normal tuning mode with the speed limit
not reduced and in stealth mode even with a reduced speed limit. Up to 20
displayed via the second digit and the decimal place. Speed display example: 23.5
Automatic route compensation: In order to compensate for the difference between the distance actually
covered and the distance displayed, the maximum speed driven is displayed after about one minute of standstill
until the distance has been covered. As soon as the difference has been compensated, the display drops to 0.0
and the e-bike switches itself off after a while. If the e-bike is switched off beforehand, the sIMPLEk saves the
difference and catches up later. As a result, the maximum speed and the distance traveled/total distance are
correctly displayed.
Note Bosch Gen4 engines with current firmware: We recommend running the automatic route
compensation after each trip to counteract the "anti-tuning measures".
, 1:1 mode]
with correct calibration (otherwise a different constant
it is displayed 1 to 1, above 20
→ 35
it is
Werbung
