Simplek Pro Bedienungsanleitung Seite 13

1. General remarks and safety instructions
Warnings / Note on the Road Traffic Act
Installed in a compatible e-bike, the sIMPLEk Pro tuning module cancels the factory-integrated speed limit of
the motor support. Therefore, the operation of the sIMPLEk Pro tuning module is prohibited and not permitted
within the scope of the Road Traffic Act. Operation is only intended on private property and racetracks that are
closed to public traffic. The use of an e-bike modified by tuning measures on public roads can lead to criminal
liability for driving without a license (§ 21 StVG) and driving without insurance cover (§ 6 PflVG). Tuning
measures on the e-bike can lead to the loss of warranty rights and manufacturer guarantees. Furthermore,
tuning measures in the event of accidents can lead to a loss of insurance cover and of accident victim assistance
services. The technical nature of the e-bike may not be designed for the use of tuning measures without further
measures, which can lead to safety risks.
When installing in the e-bike, make sure not to damage any cables when installing the protective cover of the motor
in order to avoid possible resulting short circuits or cable crushing, which can lead to electric shock or fire, among
other things.
No liability is assumed for any present or future damage (direct or indirect) resulting from non-observance of these
operating instructions. Use at your own risk.
Please always wear suitable protective clothing and a helmet.
2. Installation
Remove the battery of your e-bike before you start the installation! The module is switched in front of the original
sensor. To do this, the engine cowling usually has to be removed. Depending on the engine variant, additional tools
are required for this.