Note; Up Time - Vestamatic Rollmat Plus G Bedienungsanleitung

Note

The Vestamatic Rollmat Plus G/S V3.1 roller shutter control is
delivered with the following manufacturer's default up and down
times (day function is activated):
· Daily up time – 0ß6:0ß0 every morning
· Daily down time – 2ß0:0ß0 every evening
Please find the manufacturer's default DIP switch settings
in the tables on page 58 and page 61.
Important: It is important to push the selector switch "auto-
matic/manual mode" to automatic mode (A), in order
to be able to perform the following programming
steps.
Check the current setting. If the selector switch is
not set on (A), correct the setting by pushing it all
the way to the left until you hear the "click".
Basic functions
- 49 -
Basic functions
By operating the combination of set and up button you can set
the up time.
Setting the up time can be performed as follows:
1. Press the set button first and keep it pressed, then:
A. Press the up button and keep it pressed to fast forward
the up time.
B. Shortly tap the up button to slow forward the up time.
or
2. Press the up button first and keep it pressed, then:
A. Press the set button and keep it pressed to fast reverse
the up time.
B. Shortly tap the set button to slow reverse the up time.
The display will now indicate the set value. Once the programming
buttons are no longer operated, the display will indicate the cur-
rent time again. Tapping the up button will check the set value
and the display will again indicate the previously set up time.
After approx. 2 seconds, the display will indicate the current time
again.
G G

Up time

- 50 -