Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Problem check list
Faults
drum stationary,
no function
machine moves,
does not stand
properly
no spin
little or no detergent
enters the machine
conditioner in the
machine at
programme start
conditioner
compartment
flooded
traces of water on
floor
washing not cleaned
washing is damaged
powder residues in
washing
The water is not
pumped off
If your washing machine fails to operate correctly after having carried out the procedures listed
above, please contact your customer service.
Possible causes
- no electricity supply
- no programme selected
- main switch on position "
- loading door open
- does not stand correct on the
floor
- main switch on position "
- the washing is unevenly
distributed
- detergent drawer blocked
- incorrect programme selection
- too much conditioner in
compartment III
- intake valve blocked
- excess lather dripping from
machine
- detergent drawer open
- inlet hose leaking
- drain trap fitted incorrectly
- too much or too little of
detergent
- incorrect programme selection
- incorrect temperature
selection
- sharp object in drum
- sharp object in clothing
- faulty fabrics
- interrupted water supply
- detergent in conditioning
drawer
- the run off system is blocked
or the hose has a kink
- the drain pump is clogged
Solving the problem
- plug in another socket check fuse
- select program (see p. 36-38)
"
- turn main switch to "
position
- close loading door
- adjust machine properly – see
instruction page 35
"
- turn main switch to "
- if the laundry is unevenly distributed,
the machine will automatically return to
the wash cycle for a short period, until
the spin cycle can commence. If this
is not possible the programme will end
without spinning.
Loosen the washing by hand, and
turn the programme selector to "
position.
- clean drawer (see p. 41)
- see programme selection (see p.36-38)
- fill to max. - line only
- clean detergent drawer and valve
(see p. 41)
- correct detergent dosage
- close drawer
- check connection of inlet hose on
machine and cold fill tap.
- see p. 42
- correct detergent dosage (see p. 39)
- see Programme selection (p. 36-38)
- see Programme selection (p. 36-38)
- check inside drum
- check pockets
- check water supply
- clean detergent drawer (see p. 41)
- check hose and runoff
- clean drain pump (see p. 42)
43
" or "
"
" position
"
Werbung
